| |
 |
EX47-HD / Unimog U 2450 L 38 |
Chassis
- Mercedes-Benz UNIMOG 4x4
- UNIMOG heavy duty chassis
- U-section frame
- Torsional flexible load carrying frame
- Wheel base 3850 mm (12'6'')
- Mercedes-Benz OM 366 LA 6-cylinder inline Turbodiesel
- Displacement 5.958 ccm (364 cu.in.)
- Performance 177 kW/240 hp Euro 2
- Max. torque 760 Nm (560 lb.-ft.)
- Cross country ratio transmission
- Additional gearbox with crawler gears for hill climbing capacity over 100% grade
- All gears usable both forward and reverse
- All wheel drive can be selected while driving
- Differential locks for front and both rear axles, can be selected while driving
- Fully protected drive train using torque tube technology
- High mounted transmission and transfer case
- High ramp breakover angle
- Portal axels for high axle ground clearance
- Front and rear tires follow same track
- Enhanced driving safety using coil springs, shock absorbers and stabilizers both front and rear
- Four wheel disk brakes
- Enhanced water fording capacity with raised engine air intake and vent openings
- Torsion free drivers cab mounting using 3 point kinematic mount
- Soundproofed and viabration isolated drivers cab
- Hydraulic power steering
- Air brakes and power assisted clutch
- Engine compartment easily serviced from exterior hood
- Manual hydraulic drivers cab tilt
- Low emmision turbo diesel engine
- Engine oil lubrication system designed for extreme tilt and slope
- Engine enclosure for lower noise emission
- Tires 14.00 R 20 Michelin XZL, tubeless
- Tire pressure regulating system, to regulate pressure while driving
- 2 chamber fuel tanks, capacity 600 liters (158 U.S. gallons)
- Fuel prefilter with water seperator
- Car alarm system
- Air suspended Recaro seats
- Satellite navigation system (GPS)
- Additional gauges for engine and transmission monitoring
- Back eye camera
- Roof camera
- Chassis camera
- Integrated airconditioner, performance 5 kW (17,000 btu)
- Roof rack with stainless steel branch guard
- Crane for loading of spare wheel
- Searchlights left and right
- Truck horns
- Ram protection with storage box for snow chains
- 4 Xenon high beam lights, mounted at the ram protection
- Hydraulic front winch
Body Unit
Frame assembly
- Mercedes-Benz approved, low 3 point kinematic attachment with main and flex mounts for stress free body coupling to the torsion elastic chassis frame
Body unit construction
- Self supporting UNICAT sandwich plate panels of fibre glass composite
- Panel connections made by adhesive bond to custom extrusions eliminates metalic heat conduction paths
- Matched thermal coeficients of expansion prevent distortion with changes in temperature
- Wall thickness 60 mm (2,36'') with polyurethane foam insulation, 3 mm (0,12'') FRP outer surface, 2 mm (0,08'') FRP inner surface
- Ins. rating 0,44 W/m2 K (0,078 btu/ft h degF)
- Bottem panel with integrated welded steel frame and surfaces of FRP
Access to drivers cab
- Highly flexible waterproof bellows coupling
- Sliding door to close passage way
Entrance door and storage compartment doors
- UNICAT - entrance door and storage doors constructed of fibreglass composite plates and frames
- Thickness of doors 60 mm (2,36'')
- Double sealed doors with heavy duty locks with seal compression
- Stainless steel hinges throughout
- Additional retractable bolts at top and bottom of entrance door
- Safety cylinder locks all keyed alike
Windows and skylights
- Burglarproof, scratchproof top hinged sidelights and skylights
- Double insulated thermal window glass
- Shutters and moskito nets
- Hatches electric powered
Lifting roof
- UNICAT - lifting sleeping roof with electric drive mechanism
- Well insulated, expedition proven and maintenance free
- Electric powered sliding roof above the bed area
Interior Lay Out
Inner dimensions of the cabin
- length 4500 mm ( 14'9''), width 2240 mm ( 7'4''), height 1950 mm ( 6'5'')
Seating Unit
- Seating unit with adjustable table on pedastel in the front of the cabin
- Seating unit converts to a additional bed
Office
- Foldable desk with storage space for PC, monitor and printer
Beds
- Double bed with comfortable matress in lifting roof area 160 x 200cm (5'3'' x 6'7'')
Sanitary room
- Combined shower and toilet room with door, to seperate from livingroom
- Fold-up lavabo above the toilette
- Hanger cupboard with mirrors
- Also usable as drystorage due to is own radiator
Kitchen
- Stainless steel countertop with integrated sink
- Single handle faucet for warm and cold water
- 3-flame gas stove
- Conventional/microwave oven
- 130 l (34 gallons) fridge with ***-freezer
- Kitchen closet with drawers
Storage
- Storage space in the seating benches
- Big wardrobe
- Large outside storage compartments under seat pedestal
- Garage for Quad, boat and other equipment in the rear of the cabin
Workmanship
- All furniture is custom built to the highest cabinetmaking standard out of wood core plywood using heavy duty locks and hinges
- Materials and finishes may be specified by customer
Lay out
- Design and color of floor, walls and ceiling may be chosen by the customer
- Walls and ceiling are painted with multiple coats
- Upholstery made of ALCANTARA
Technical equipment
Electrical equipment
- Custom control panel to control powermanagement and liquide storages
- Battery main switch, savety cutout, fault current breaker
- DC power supply by AGM battery bank, automatic I-U regulated alternator and AC automatic I-U shore charger with cell temperature sensing
- Battery capacity: 24 V 510 Ah
- Alternator charge rate: 28 V 100 A
- Shore charge rate: 28V 100 A
- Inverter 24 V/230 V, max output 4 kW
- Shore power connector 230V (50Hz)
- Power plugs for 24 V and 230 V AC
- Solar system
Generator
- Watercooled Fischer-Panda diesel generator
- Cooling-water circulation connected to the engine cooling system
- Performance: 4,5 kW
- Water cooled muffler
Musik system / TV / Video
- Music installation with CD-changer
- DVD player
- TV satellite receiver
Lighting
- Integrated low voltage XELOGEN lights over the table, kitchen, shower, storage area and lifting roof
- Lights for outside storage compartments
- Reading lights in bed and seating area
Water supply
- 400 l (105 gallons) freeze proof drinking water tanks
- 22 l (5.8 gallons) hot water-heat exchanger
- Freeze proof waste water tank, capacity 80 Liters (21 U.S. gallons)
- All components are built due to highest household quality standards
- All plumbing is insulated to prevent freezing
- City water connector and outside shower
- Water filtration system
LPG supply
- 2 x 11 kg gas bottles to be serviced from outside
- Remote controlled management with gas alarm system
Toilet
- Porcelain-vacuum toilet with water flushing
- Freeze proof sewage holding tank
Heating system
- Stepless diesel/electric powered warm water central heating (9 kW) with engine preheating system and drivers cab preheating system
- High radiant heat share due to radiators in living area and towel radiator in bath area
- Antifrost system
Others
- Integrated airconditioner, performance 5 kW (17,000 btu), powered by the generator or shore power
- Safe
Weights and measures
GVWR
- 11,900 kg (26,000 lbs)
Overall dimensions
- Length 7490 mm ( 24'7''), width 2500 mm ( 8'2''), height 3700 mm ( 12'2'')
|
 |
© 2007 UNICAT - Information is subject to availability, changes in price, technical modification and error. |
 |
|
|
|
|