| |
 |
BS 6-KD |
Chassis
- Bucher Duro I 4x4 S
- Wheel base 3230 mm (10´7´´)
- VM D 642 LB 6-cylinder inline Turbodiesel
- Displacement 4162 ccm (254 cu.in.)
- Performance 118 kW / 160 hp Euro 2
- Max. torque 400 Nm (295 lb.-ft.)
- Allison 4-speed automatic transmission
- 2-range transfer case with on road and off road ratios
- Permanent all wheel drive with longitutional TORSEN differential
- TORSEN differentials in front and rear axle
- Inboard, hydraulic disk brakes for all 4 wheels
- Bucher DE DION axles with watt linkage and stabilizers
- Enhanced driving safety using coil springs and shock absorbers both front and rear
- Tires 275/80 R 20 Michelin XZL, tubeless
- Tire pressure regulating system to regulate pressure while driving
- 2 chamber fuel tanks, capacity 240 liters (63 U.S. gallons)
- Fuel prefilter with water seperator
- Additional sound insulation and lining of drivers cab
- Recaro seats
- Satellite navigation system (GPS)
- Additional gauges for engine and transmission monitoring
- Integrated airconditioner, performance 4,5 kW (15,000 btu)
- Container loading gear with spring compression tools and special wheels
- (Vehicle can be loaded into a 20" container without external help.)
Body Unit
Frame assembly
- Low 3 point kinematic attachment with main and flex mounts for stress free body coupling to the chassis frame
Body unit construction
- Self supporting UNICAT sandwich plate panels of fibre glass composite
- Panel connections made by adhesive bond to custom extrusions eliminates metalic heat conduction paths
- Matched thermal coeficients of expansion prevent distortion with changes in temperature
- Wall thickness 60 mm (2,36´´) with polyurethane foam insulation, 3 mm (0,12´´)
- FRP outer surface, 2 mm (0,08´´) FRP inner surface
- Ins. rating 0,44 W/m² K (0,078 btu/ft² h degF)
- Bottem panel with integrated welded steel frame and surfaces of FRP
Access to drivers cab
- Removable lids in drivers cab and body to close passage way
Entrance door and storage compartment doors
- UNICAT - entrance door and storage doors constructed of fibreglass composite plates and frames
- Thickness of doors 60 mm (2,36´´)
- Double sealed doors with heavy duty locks with seal compression
- Stainless steel hinges throughout
- Additional retractable bolts at top and bottom of entrance door
- Safety cylinder locks all keyed alike
Windows and skylights
- Top hinged sidelights with double insulated acrylic glass
- Skylight with acrylic glass, can be stepped on
- Shutters and moskito nets
Lifting roof
- UNICAT - lifting roof with foldable side walls
- Electric lift mechanism, walls manually foldable
- Well insulated, expedition proven and maintenance free
- Vehicle can be driven with erected lifting roof
Interior Lay Out
Inner dimensions of the cabin
- length 3416 mm (11´2´´), width 1900 mm (6´3´´), height 1460 / 1860 mm (4´9´´ / 6´1´´)
Seating Unit
- USeating unit on pedastel in the rear of the cabin
- Seating unit converts to additional bed
Bed
- Double bed with comfortable matresses on front bed pedestal
- 160 cm x 200 cm (5´3´´ x 6´7´´)
Kitchen
- Stainless steel countertop with integrated sink
- Single handle faucet for warm and cold water
- 2-flame gas stove
- 75 l (26 gallons) fridge with ***-freezer
- Kitchen closet with drawers
Storage
- Storage space in the seating benches
- Big wardrobe in rear
- Large outside storage compartments in front
- Aluminium exterior storage box
Technical floor
- Dedicated space beneath the main floor for water pump, heater, and retractable stairs
- Floor is removable to service equipment below
Workmanship
- All furniture is custom built to the highest cabinetmaking standard out of wood core plywood using heavy duty locks and hinges
- Materials and finishes may be specified by customer
Lay out
- Design and color of floor, walls and ceiling may be chosen by the customer
- Walls and ceiling are painted with multiple coats
- Upholstery made of ALCANTARA
Technical equipment
Electrical equipment
- Custom control panel to control power management
- Battery main switch, savety cutout, fault current breaker
- DC power supply by AGM battery bank, automatic I-U regulated alternator and AC automatic I-U shore charger with cell temperature sensing
- Battery capacity: 24 V 225 Ah
- Alternator charge rate: 28 V 90 A
- Shore charge rate: 28V 25 A
- Power plugs for 12 V DC, 24 V and 230 V AC
Lighting
- Low voltage XELOGEN lights over the table, kitchen and bed
- Lights for outside storage compartments
- Reading lights in bed and seating area
Water supply
- 6 x 20 l (6 x 5 gallons) freeze proof drinking water tanks
- All components are built due to highest household quality standards
- All plumbing is insulated to prevent freezing
- Outside shower
LPG supply
- 1 x 11 kg gas bottle to be serviced from outside
Heating system
- 2 stage diesel powered air heating system (5 kW)
Others
- Safe
Weights and measures
GVWR
- 5,850 kg (12893 lbs)
Overall dimensions
- length 5460 mm (17´11´´), width 2020 mm (6´8´´), height 2590 mm (8´6´´)
|
 |
© 2007 UNICAT - Information is subject to availability, changes in price, technical modification and error. |
 |
|
|
|
|